Ainm:
The 2 boxes on the default screen are the indicators left of the throttle and right of the steering wheel.
It comes with EdgeTX operating system which is very powerful.
you will need to do quite a few tutorials on YouTube luckily there are quite a few videos to make it work the way you want.
Jewelry agus Watch
Cuirtíní Dorais
This only took me a while to do it properly, the CH1 throttle and the CH2 steering wheel.
Bréagáin Robot
CH1 throttle and CH2 steering wheel. Unfortunately for me, it didn't change anything.
FM Tarchuradóirí & Imreoirí
Since I had done everything and the problem persisted, I did the following.
1) I downloaded from radiomaster
Tomhais Teochta
The folder with for the SD card ( MT12 Factory SD Contents and Firmware )
Uirlisí Makeup
Fuarú DIY Sreabhach
If there was also the ability to change the steering wheel from right to left,
for us who play with the steering wheel on the left, it would be the end! ! !

I only recommend it if you have enough patience.
Have a great day from Greece! ! !

Ainm:
The 2 boxes on the default screen are the indicators left of the throttle and right of the steering wheel.
It comes with EdgeTX operating system which is very powerful.
you will need to do quite a few tutorials on YouTube luckily there are quite a few videos to make it work the way you want.
Jewelry agus Watch
Cuirtíní Dorais
This only took me a while to do it properly, the CH1 throttle and the CH2 steering wheel.
Bréagáin Robot
CH1 throttle and CH2 steering wheel. Unfortunately for me, it didn't change anything.
FM Tarchuradóirí & Imreoirí
Since I had done everything and the problem persisted, I did the following.
1) I downloaded from radiomaster
Tomhais Teochta
The folder with for the SD card ( MT12 Factory SD Contents and Firmware )
Uirlisí Makeup
Fuarú DIY Sreabhach
If there was also the ability to change the steering wheel from right to left,
for us who play with the steering wheel on the left, it would be the end! ! !

I only recommend it if you have enough patience.
Have a great day from Greece! ! !

Ainm:
The 2 boxes on the default screen are the indicators left of the throttle and right of the steering wheel.
It comes with EdgeTX operating system which is very powerful.
you will need to do quite a few tutorials on YouTube luckily there are quite a few videos to make it work the way you want.
Jewelry agus Watch
Cuirtíní Dorais
This only took me a while to do it properly, the CH1 throttle and the CH2 steering wheel.
Bréagáin Robot
CH1 throttle and CH2 steering wheel. Unfortunately for me, it didn't change anything.
FM Tarchuradóirí & Imreoirí
Since I had done everything and the problem persisted, I did the following.
1) I downloaded from radiomaster
Tomhais Teochta
The folder with for the SD card ( MT12 Factory SD Contents and Firmware )
Uirlisí Makeup
Fuarú DIY Sreabhach
If there was also the ability to change the steering wheel from right to left,
for us who play with the steering wheel on the left, it would be the end! ! !

I only recommend it if you have enough patience.
Have a great day from Greece! ! !

• 
• 
• 
• 
• 
• 
• 

• 
• 
• 
• 
• 
• 
• 

Rotate left Fionnachtain

Fantastic transmitter but complicated to use for a beginner. Also do you have time to read 3 manuals just to get it working? If so then this is everything you will ever need.
The 2 boxes on the default screen are the throttle and steering indicators. They look cute but not useful especially with this screen refresh rate.
It runs on EdgeTX which is a very powerful OS. Perhaps too powerful because you will need to read and watch quite a few manuals and tutorials to get it working as you want.
I got the ELRS version. It comes out of the box with 50Hz data rate so it takes a very long time to connect to the receiver. This is adjustable so put it to 1000Mhz and you'll have the fastest connection and lowest latency. You will loose a bit of range but you won't be using all of it anyway. Also don't forget to change the PWM output frequency to match your servo as well. Otherwise if you use a digital servo and it's stuck at 50Hz, it's noticeably slow.
Once I got everything sorted out it feels as fast as Noble NB4. Filmed the response time on 240FPS and it got the same result as NB4 too, 5 frames from wheel movement to servo movement.
Out of the box, CH1 is throttle and CH2 is steering. This is not ideal but still not a problem though. You just need to either plug the components into different ports or change the output in the EdgeTX operating system.
Léitheoirí Cód & Uirlisí Scanadh
Highly recommended! But only if you have enough patience.

Fantastic transmitter but complicated to use for a beginner. Also do you have time to read 3 manuals just to get it working? If so then this is everything you will ever need.
The 2 boxes on the default screen are the throttle and steering indicators. They look cute but not useful especially with this screen refresh rate.
It runs on EdgeTX which is a very powerful OS. Perhaps too powerful because you will need to read and watch quite a few manuals and tutorials to get it working as you want.
I got the ELRS version. It comes out of the box with 50Hz data rate so it takes a very long time to connect to the receiver. This is adjustable so put it to 1000Mhz and you'll have the fastest connection and lowest latency. You will loose a bit of range but you won't be using all of it anyway. Also don't forget to change the PWM output frequency to match your servo as well. Otherwise if you use a digital servo and it's stuck at 50Hz, it's noticeably slow.
Once I got everything sorted out it feels as fast as Noble NB4. Filmed the response time on 240FPS and it got the same result as NB4 too, 5 frames from wheel movement to servo movement.
Out of the box, CH1 is throttle and CH2 is steering. This is not ideal but still not a problem though. You just need to either plug the components into different ports or change the output in the EdgeTX operating system.
Léitheoirí Cód & Uirlisí Scanadh
Highly recommended! But only if you have enough patience.

Fantastic transmitter but complicated to use for a beginner. Also do you have time to read 3 manuals just to get it working? If so then this is everything you will ever need.
The 2 boxes on the default screen are the throttle and steering indicators. They look cute but not useful especially with this screen refresh rate.
It runs on EdgeTX which is a very powerful OS. Perhaps too powerful because you will need to read and watch quite a few manuals and tutorials to get it working as you want.
I got the ELRS version. It comes out of the box with 50Hz data rate so it takes a very long time to connect to the receiver. This is adjustable so put it to 1000Mhz and you'll have the fastest connection and lowest latency. You will loose a bit of range but you won't be using all of it anyway. Also don't forget to change the PWM output frequency to match your servo as well. Otherwise if you use a digital servo and it's stuck at 50Hz, it's noticeably slow.
Once I got everything sorted out it feels as fast as Noble NB4. Filmed the response time on 240FPS and it got the same result as NB4 too, 5 frames from wheel movement to servo movement.
Out of the box, CH1 is throttle and CH2 is steering. This is not ideal but still not a problem though. You just need to either plug the components into different ports or change the output in the EdgeTX operating system.
Léitheoirí Cód & Uirlisí Scanadh
Highly recommended! But only if you have enough patience.

• 
• 
• 
• 

• 
• 
• 
• 

Rotate left Spéaclaí & Fuinneoga